feat(xml): Generate rate throttling rules via 'recent' extension and its hitcount per time

README.md

@@ -110,10 +110,18 @@ addr =
 ports = 80, 443
 proto = tcp
 state = NEW
+hitcount =
 do_ipv6 = false
 firewalld_direct_file_abs = /etc/firewalld/direct.xml
 restart_firewalld_after_change = true
 
+[anyone-may-icmp-with-limit]
+addr =
+ports =
+proto = icmp
+state = NEW,UNTRACKED
+hitcount = 120/60
+
 [anyone-can-access-website]
 
 # Unsetting 'proto' while having a 'ports' value results in an invalid section
@@ -128,8 +136,9 @@ addr = 2606:4700:20::681a:804, lowendtalk.com
 ports = 80, 443
 do_ipv6 = true
 
-[allow-anyone-to-access-mail-services]
+[anyone-may-access-mail-services]
 ports = 143, 993, 110, 995, 25, 465, 587
+hitcount = 120/60
 
 [deny-all]
 target = DROP
@@ -265,6 +274,10 @@ A custom `[section]` has the following options. We're calling them locals most o
   state =
   ```
 
+* `hitcount`, **_optional_**, defaults to an empty value: A rate-limiting feature. Set this to `hits/seconds` to limit the amount of matched packets to `hits` over the course of `seconds`, e.g. `10/60` sets the maximum packet rate to 10 packets over the course of 60 seconds. Any packet exceeding the rate will be dropped.
+
+  Adding a `hitcount` will automatically add 2 `ip(6)tables` rules right before the actual rules. Rules follow the [iptables "recent" extension](https://ipset.netfilter.org/iptables-extensions.man.html#lbBW). The first rule does `--update`, the second one does `--set` followed by the rule you specified.
+
 * `do_ipv6`, __*optional*__, defaults to `false`: Decide if you want `firewalld` to generate `ip6tables` rules in addition to `iptables` rules. A default install of Docker Engine will have its IPv6 support disabled in `/etc/docker/daemon.json`. You may still want your machine to handle incoming IPv6 traffic. If your machine truly doesn't use IPv6 feel free to leave this at `false`. Otherwise `update-firewall-source.py` generates unused rules that clutter your rule set.
 
   If this is `true` IPv6 addresses found or resolved in `addr` in a `[section]` will be discarded.

examples/config.ini.example

@@ -4,10 +4,18 @@ addr =
 ports = 80, 443
 proto = tcp
 state = NEW
+hitcount =
 do_ipv6 = false
 firewalld_direct_file_abs = /etc/firewalld/direct.xml
 restart_firewalld_after_change = true
 
+[anyone-may-icmp-with-limit]
+addr =
+ports =
+proto = icmp
+state = NEW,UNTRACKED
+hitcount = 120/60
+
 [anyone-can-access-website]
 
 # Unsetting 'proto' while having a 'ports' value results in an invalid section
@@ -22,8 +30,9 @@ addr = 2606:4700:20::681a:804, lowendtalk.com
 ports = 80, 443
 do_ipv6 = true
 
-[allow-anyone-to-access-mail-services]
+[anyone-may-access-mail-services]
 ports = 143, 993, 110, 995, 25, 465, 587
+hitcount = 120/60
 
 [deny-all]
 target = DROP

update-firewall-source.py

@@ -58,6 +58,7 @@ class CONST(object):
         {"key": "ports", "value": "80, 443", "is_global": False, "empty_ok": True},
         {"key": "proto", "value": "tcp", "is_global": False, "empty_ok": True},
         {"key": "state", "value": "NEW", "is_global": False, "empty_ok": True},
+        {"key": "hitcount", "value": "", "is_global": False, "empty_ok": True},
         {"key": "do_ipv6", "value": "false", "is_global": False, "empty_ok": False},
         {"key": "firewalld_direct_abs", "value": "/etc/firewalld/direct.xml", "is_global": True, "empty_ok": False},
         {"key": "restart_firewalld_after_change", "value": "true", "is_global": True, "empty_ok": False}
@@ -290,6 +291,7 @@ def add_rule_elem(
         arg_proto: str = None,
         arg_state: str = None,
         arg_ports: list = None,
+        arg_hitcount: str = None,
         arg_address: str = None,
         arg_chain: str = "FILTERS",
         arg_in_interface: str = None) -> bool:
@@ -300,6 +302,43 @@ def add_rule_elem(
         arg_proto = "icmp"
     if arg_proto == "icmp" and address_family == "ipv6":
         arg_proto = "icmpv6"
+
+    if arg_hitcount:
+        try:
+            lxml.etree.SubElement(arg_fw_rule_data, "rule",
+                                  ipv=f"{address_family}",
+                                  table=f"filter",
+                                  chain=arg_chain,
+                                  priority=f"""{prio}""").text = \
+                f"""{"--in-interface " + arg_in_interface + " " if arg_in_interface else ""}""" \
+                f"""{"--protocol " + arg_proto + " " if arg_proto else ""}""" \
+                f"""{"--match multiport --destination-ports " + ",".join(arg_ports) + " " if arg_ports else ""}""" \
+                f"""{"--source " + arg_address + " " if arg_address else ""}""" \
+                f"""{"--match recent --name " + chr(34) + arg_section[:256] + chr(34) +
+                " --update --hitcount " + arg_hitcount.split("/")[0] + " --seconds " + arg_hitcount.split("/")[1] + " " 
+                if arg_section else ""}""" \
+                f"""--jump DROP"""
+            prio += 1
+
+            lxml.etree.SubElement(arg_fw_rule_data, "rule",
+                                  ipv=f"{address_family}",
+                                  table=f"filter",
+                                  chain=arg_chain,
+                                  priority=f"""{prio}""").text = \
+                f"""{"--in-interface " + arg_in_interface + " " if arg_in_interface else ""}""" \
+                f"""{"--protocol " + arg_proto + " " if arg_proto else ""}""" \
+                f"""{"--match multiport --destination-ports " + ",".join(arg_ports) + " " if arg_ports else ""}""" \
+                f"""{"--source " + arg_address + " " if arg_address else ""}""" \
+                f"""{"--match recent --name " + chr(34) + arg_section[:256] + chr(34) +
+                " --set" if arg_section else ""}"""
+            prio += 1
+        except lxml.etree.LxmlError as le:
+            log.error(f"""Failed to add XML '<rule ipv=f"{address_family}" .../>'\n"""
+                      f"Verbatim exception was:\n"
+                      f"f{le}\n"
+                      f"Exiting 8 ...")
+            sys.exit(8)
+
     try:
         lxml.etree.SubElement(arg_fw_rule_data, "rule",
                               ipv=f"{address_family}",
@@ -369,7 +408,8 @@ def add_fw_rule_to_xml(
         section_name: str,
         target: str,
         ports: list,
-        proto: str) -> bool:
+        proto: str,
+        hitcount: str) -> bool:
     global arg_fw_rule_data
     global arg_allow_sources
     addr = arg_allow_sources
@@ -390,8 +430,12 @@ def add_fw_rule_to_xml(
                     arg_proto=proto,
                     arg_state=config_obj.get(section_name, "state"),
                     arg_ports=ports,
+                    arg_hitcount=hitcount,
                     arg_address=address)
-                rules_already_added[address_family] += 1
+                if hitcount:
+                    rules_already_added[address_family] += 3
+                else:
+                    rules_already_added[address_family] += 1
         if not len(addr["ipv4"]) and not len(addr["ipv6"]):
             if address_family == "ipv4" or (address_family == "ipv6"
                                             and
@@ -405,8 +449,12 @@ def add_fw_rule_to_xml(
                     arg_section=section_name,
                     arg_proto=proto,
                     arg_state=config_obj.get(section_name, "state"),
-                    arg_ports=ports)
+                    arg_ports=ports,
-                rules_already_added[address_family] += 1
+                    arg_hitcount=hitcount)
+                if hitcount:
+                    rules_already_added[address_family] += 3
+                else:
+                    rules_already_added[address_family] += 1
 
     return True
 
@@ -624,7 +672,8 @@ if __name__ == "__main__":
                            section,
                            target=config.get(section, "target"),
                            ports=config.getlist(section, "ports"),
-                           proto=config.get(section, "proto"))
+                           proto=config.get(section, "proto"),
+                           hitcount=config.get(section, "hitcount"))
     for arg_address_family in ["ipv4", "ipv6"]:
         if rules_count(arg_address_family):
             add_rule_elem(